Sheltering In-Place

Although your first instinct may be to get away as far and as fast as possible: from a hazardous materials accident, evacuation is not always the safest option.

Your home or workplace can be a safe haven during a hazardous materials emergency. Upfront preparations are the key to your safety.

PREPARE YOUR HOME BEFORE DISASTER STRIKES

Choose a room: The ideal room has few windows, is large enough to house your whole family or coworkers comfortably, and preferably has access to water. A bedroom with adjoining bath, a large restroom, or an employee break room may be good choices.

Prepare window coverings: When the room is used as a shelter, the windows must be sealed against any outside air entering. Measure all window openings in the room, then add a generous six inches on all sides of each window measurement. Don't forget the skylights. Cut plastic sheeting according to the measurements. Label each sheet to show which window it covers. Store enough rolls of duct tape to go around all the windows completely

Prepare vent and door coverings: Just as you did for the windows, measure each air vent door, and any other openings leading outside the room. Cut and label plastic sheeting for each opening. Storing multiple rolls of tape allows more than one person to work at a time.

Assemble shelter in-place supplies: Your supplies should be stored in the chosen shelter room. Put the plastic sheets, duct tape, and other recommended supplies (see list below) together in one container. An under-the-bed box works well, or use a container that fits on a closet shelf or in a cabinet.

SHELTERING IN-PLACE SUPPLIES

SHELTERING IN-PLACE PROCEDURES

SHELTER IN-PLACE "NO-NOs"

DO NOT

Link to Back to the Main Directory